{"id":988,"date":"2026-01-14T21:14:06","date_gmt":"2026-01-14T13:14:06","guid":{"rendered":"https:\/\/bfefishtank.com\/?p=988"},"modified":"2026-01-14T21:14:06","modified_gmt":"2026-01-14T13:14:06","slug":"aquarium-stocking-calculator-guide-us-gallons-inches-how-to-stock-safely-without-killing-fish","status":"publish","type":"post","link":"https:\/\/bfefishtank.com\/sv\/aquarium-stocking-calculator-guide-us-gallons-inches-how-to-stock-safely-without-killing-fish\/","title":{"rendered":"Aquarium Stocking Calculator Guide (US Gallons\/Inches): How to Stock Safely Without Killing Fish"},"content":{"rendered":"<p><strong>Quick answer:<\/strong>\u00a0A stocking calculator is a planning tool, not a permission slip. Use it to catch obvious problems (tank too small, incompatible fish, not enough filtration), then confirm with\u00a0<em>real-world signals<\/em>\u00a0like nitrate trend and fish behavior. Stock slowly, aim conservative (often ~70\u201385% on calculators), and adjust based on your maintenance habits.<\/p>\n<h2 id=\"what-is\">What a stocking calculator actually calculates (and what it can\u2019t)<\/h2>\n<p>Most calculators try to estimate some version of\u00a0<strong>bioload<\/strong>\u2014the amount of waste your fish and feeding routine create\u2014and compare it to the system\u2019s ability to process that waste via bacteria, filtration flow\/media, plants, and maintenance. Some tools also check\u00a0<strong>compatibility<\/strong>\u00a0(aggression, shoaling needs, water parameter overlap) and suggest a\u00a0<strong>water-change schedule<\/strong>.<\/p>\n<p>For example, AqAdvisor describes itself as calculating bioloads, recommending pH\/temperature\/hardness overlap, estimating filtration capacity for your chosen filter(s), recommending water change schedule, and flagging compatibility issues based on a species database with many attributes (size, bioload factor, minimum group size, minimum tank footprint, aggression flags, etc.).<\/p>\n<p><a href=\"https:\/\/aqadvisor.com\/articles\/AqAdvisorIntro.php\" rel=\"nofollow noopener\" target=\"_blank\">AqAdvisor intro page<\/a><\/p>\n<p><strong>What calculators can\u2019t reliably know:<\/strong>\u00a0your real feeding amount, how messy your fish are, how planted the tank is, how strong your biofilm is, whether you rinse filter media in tap water, your actual dissolved oxygen at night, or whether your \u2018peaceful\u2019 fish turns into a bully after it matures. So treat calculator results as a starting point\u2014not proof.<\/p>\n<h2 id=\"why-inch-rule\">Why the \u2018inch-per-gallon\u2019 rule fails (and what to use instead)<\/h2>\n<p>The classic \u20181 inch of fish per gallon\u2019 guideline is easy, but it ignores fish body mass, activity, tank footprint, modern filtration, and even the fact that decorations displace water. The Spruce Pets explains that 10 inches of slender danios isn\u2019t the same as 10 inches of full-bodied goldfish, and also highlights that tank surface area (oxygen exchange) matters\u2014not just gallons.<\/p>\n<p><a href=\"https:\/\/www.thesprucepets.com\/amount-of-fish-and-aquarium-size-1378335\" rel=\"nofollow noopener\" target=\"_blank\">Guidelines for Stocking Your Aquarium (The Spruce Pets)<\/a><\/p>\n<p>A better mindset is:\u00a0<strong>stock for adult size + behavior + oxygen\/space + your maintenance level<\/strong>. INJAF\u2019s \u2018think like a fish\u2019 approach is a good way to avoid calculator tunnel vision: consider adult size, shoaling needs, territorial behavior, swimming style (sprinter vs couch potato), preferred water layer, and bioload as more than just length.<\/p>\n<p><a href=\"https:\/\/injaf.org\/articles-guides\/general-guides\/understanding-fish-stocking-guides\/\" rel=\"nofollow noopener\" target=\"_blank\">Understanding fish stocking guides (INJAF)<\/a><\/p>\n<h2 id=\"inputs\">Inputs that make calculators more accurate (what to measure before you click \u2018calculate\u2019)<\/h2>\n<ul>\n<li><strong>Tank footprint (length \u00d7 width) in inches<\/strong>: footprint strongly affects swim room and surface area for gas exchange.<\/li>\n<li><strong>True water volume<\/strong>: subtract displacement from substrate\/rocks\/wood (many tanks hold 10\u201315% less water than \u2018rated\u2019 volume).<\/li>\n<li><strong>Filter model or real GPH<\/strong>: many calculators use flow to estimate circulation + biofiltration headroom.<\/li>\n<li><strong>Temperature<\/strong>: warmer water holds less oxygen; high-temp setups need more aeration and are less forgiving.<\/li>\n<li><strong>Planting level<\/strong>: heavily planted tanks often handle nitrate better (but plants also reduce open swim space).<\/li>\n<li><strong>Fish adult size + quantity<\/strong>: always plan for adult size, not store size.<\/li>\n<\/ul>\n<h2 id=\"how-to-use\">How to use a stocking calculator (step-by-step)<\/h2>\n<ol>\n<li>Enter your tank dimensions in inches (not just gallons).<\/li>\n<li>Enter your filter (or GPH). If your filter is underrated, fix that before you stock heavily.<\/li>\n<li>Add fish by adult size and realistic quantities (e.g., schooling fish groups).<\/li>\n<li>Check warnings: minimum tank size, aggression\/compatibility, and water parameter overlap.<\/li>\n<li>Look at suggested water change schedule and treat it as the \u2018price\u2019 of that stocking plan.<\/li>\n<li>Adjust until the plan matches your lifestyle: if you only want to water-change every 2 weeks, stock lighter.<\/li>\n<li>After the tank is cycled, add fish gradually (often \u226425% of the planned bioload at a time) and re-check nitrate weekly for a few weeks before adding more.<\/li>\n<\/ol>\n<p>Aquarium Co-Op recommends using nitrate as the \u2018easy reality check\u2019: if you can consistently keep nitrate below your target with your chosen water-change frequency, your waste load is within what your tank can handle. They also emphasize the three big drivers of stocking success: waste load, swimming space, and aggression.<\/p>\n<p><a href=\"https:\/\/www.aquariumcoop.com\/blogs\/aquarium\/how-many-fish\" rel=\"nofollow noopener\" target=\"_blank\">How Many Fish Can I Put in a Fish Tank? (Aquarium Co-Op)<\/a><\/p>\n<h2 id=\"interpret\">How to interpret outputs (stocking %, filtration %, and water-change recommendations)<\/h2>\n<h3 id=\"interpret-stocking\">1) Stocking % (bioload)<\/h3>\n<p>Think of stocking % as a\u00a0<strong>risk meter<\/strong>. At 100%, the tool is saying \u2018this is the edge of what it considers reasonable under its assumptions\u2019. For beginners, it\u2019s usually smart to aim below that (for example ~70\u201385%) because feeding, missed maintenance, and fish growth always push the real load higher.<\/p>\n<h3 id=\"interpret-filtration\">2) Filtration % \/ flow assumptions<\/h3>\n<p>Some calculators attempt to estimate filtration capacity based on your chosen filter(s). AqAdvisor specifically calls out estimating filtration capacity and water-change schedule recommendations based on total bioload.<\/p>\n<p><a href=\"https:\/\/aqadvisor.com\/articles\/AqAdvisorIntro.php\" rel=\"nofollow noopener\" target=\"_blank\">AqAdvisor intro (filtration + water change)<\/a><\/p>\n<h3 id=\"interpret-chemistry\">3) Environmental overlap (temp\/pH\/hardness)<\/h3>\n<p>Tools like The Tank Guide\u2019s Stocking Advisor highlight shared safe zones for temperature\/pH\/hardness and flag mismatches. Use this to prevent the common beginner error of mixing fish with conflicting requirements.<\/p>\n<p><a href=\"https:\/\/thetankguide.com\/stocking-advisor.html\" rel=\"nofollow noopener\" target=\"_blank\">Stocking Advisor (The Tank Guide)<\/a><\/p>\n<h2 id=\"common-traps\">Common beginner traps (and how to avoid them)<\/h2>\n<div class=\"grid\">\n<div class=\"card\"><strong>Buying juveniles and \u2018forgetting\u2019 adult size<\/strong><br \/>\nPlan for adult size and minimum tank footprint; don\u2019t stock based on what fits today.<\/div>\n<div class=\"card\"><strong>Ignoring tank shape<\/strong><br \/>\nA tall 20g and a 20g long are totally different in swim room and surface area.<\/div>\n<div class=\"card\"><strong>Treating \u2018100% stocked\u2019 as a goal<\/strong><br \/>\nTreat it as an upper guideline; beginners do better under it.<\/div>\n<div class=\"card\"><strong>Assuming filtration can replace oxygen<\/strong><br \/>\nHigh bioload increases oxygen demand; surface agitation\/aeration matters.<\/div>\n<div class=\"card\"><strong>Adding all fish at once<\/strong><br \/>\nEven with a filter, bacterial colonies need time to adjust; add gradually.<\/div>\n<div class=\"card\"><strong>Over-trusting compatibility flags<\/strong><br \/>\nTools are good at \u2018common\u2019 conflicts but can\u2019t predict every individual fish.<\/div>\n<div class=\"card\"><strong>Not accounting for plants correctly<\/strong><br \/>\nPlants can help nitrate, but they don\u2019t magically fix overfeeding or aggression.<\/div>\n<\/div>\n<h2 id=\"real-world\">Reality-check: the 3 tests that beat any calculator<\/h2>\n<ol>\n<li><strong>Nitrate trend test (weekly for 2\u20133 weeks):<\/strong>\u00a0If nitrate climbs faster than your water-change schedule can control, your stocking\/feeding is too heavy. Aquarium Co-Op explicitly recommends using nitrate (and keeping it under your target) as the simplest stocking reality check.<\/li>\n<li><strong>Oxygen\/behavior test:<\/strong>\u00a0If fish hang at the surface, breathe fast, or you see worse behavior at night\/morning, you may be oxygen-limited\u2014especially in warmer tanks.<\/li>\n<li><strong>Waste visibility test:<\/strong>\u00a0If you constantly see uneaten food, mulm piles, or filters clog quickly, your system is overloaded (or feeding too much).<\/li>\n<\/ol>\n<p><a href=\"https:\/\/www.aquariumcoop.com\/blogs\/aquarium\/how-many-fish\" rel=\"nofollow noopener\" target=\"_blank\">Nitrate-based stocking method (Aquarium Co-Op)<\/a><\/p>\n<h2 id=\"examples\">Example stocking plans (calculator-friendly, beginner-safe)<\/h2>\n<p>These are not \u2018the only right answers\u2019\u2014they\u2019re examples of how to think in calculator terms: choose fish that match your tank footprint, keep bioload modest, and build a community around compatible behavior.<\/p>\n<h3 id=\"ex-10g\">Example A: 10-gallon (20\u00d710 in) beginner community<\/h3>\n<ul>\n<li>Option 1: 1 betta + 6 small bottom fish (only if footprint and temperament allow) + snails\/shrimp (if compatible)<\/li>\n<li>Option 2: single-species nano school (e.g., 8\u201310 small tetras\/rasboras) + 1\u20132 snails<\/li>\n<\/ul>\n<p>Use a calculator to confirm minimum tank size and temperature overlap, then stock slowly and confirm nitrate stays manageable with your water-change routine.<\/p>\n<h3 id=\"ex-20g-long\">Example B: 20-gallon long (30\u00d712 in) \u2018easy mode\u2019 planted community<\/h3>\n<ul>\n<li>Schooling midwater fish (10\u201315 small fish)<\/li>\n<li>Bottom group (6 cory-type fish or similar)<\/li>\n<li>Optional centerpiece (1 peaceful centerpiece fish if compatible)<\/li>\n<\/ul>\n<h3 id=\"ex-55g\">Example C: 55-gallon (48\u00d713 in) community with room to grow<\/h3>\n<ul>\n<li>2\u20133 schools (e.g., 12\u201320 total small schooling fish split across species)<\/li>\n<li>Bottom crew (8\u201312 bottom fish depending on species)<\/li>\n<li>1\u20132 centerpiece fish that fit the footprint and temperament<\/li>\n<\/ul>\n<p><strong>Important:<\/strong>\u00a0Plug your exact species into your chosen calculator (AqAdvisor, The Tank Guide, etc.) because adult size and bioload vary widely.<\/p>\n<h2 id=\"advanced\">Advanced: The 5 \u2018Hidden Variables\u2019 stocking calculators can\u2019t see<\/h2>\n<p>Most tools model fish load using species traits and tank volume\/footprint, but several real-world variables can swing outcomes dramatically. Use this section to decide whether you should run your plan at 60%, 80%, or 100% of the calculator\u2019s comfort zone.<\/p>\n<h3 id=\"hidden-feeding\">1) Feeding rate (the real bioload multiplier)<\/h3>\n<p>Bioload in a home aquarium is strongly tied to how much food enters the system. Two tanks with identical fish can behave like totally different tanks if one is fed heavy for growth and the other is fed lightly. If your goal is a low-maintenance tank, set your plan assuming\u00a0<em>conservative feeding<\/em>\u00a0and avoid \u201cpower feeding\u201d unless you also scale filtration and water changes.<\/p>\n<h3 id=\"hidden-filter-media\">2) Filter media volume &amp; how you clean it<\/h3>\n<p>Many calculators can only approximate filtration from a filter model name or a GPH value. In reality, biological capacity depends on media type, how much of it you have, and whether it\u2019s regularly kept oxygenated and unclogged. If you rinse media under untreated tap water, you can crash biofiltration even if a calculator says you\u2019re safe.<\/p>\n<h3 id=\"hidden-oxygen\">3) Oxygen at night (especially in warm tanks)<\/h3>\n<p>Warm water holds less oxygen, and heavily stocked tanks can become oxygen-limited before they become \u201cnitrate-limited.\u201d If your plan is near the edge, prioritize surface agitation, good circulation, and avoiding overfeeding. If fish gas at the surface, treat it as an emergency signal to reduce load and improve aeration.<\/p>\n<h3 id=\"hidden-footprint\">4) Footprint vs height (swim room + gas exchange)<\/h3>\n<p>Two tanks can be the same gallons but behave differently: more footprint usually means better gas exchange (more surface area) and more practical swim room for active species. This is why calculators that accept\u00a0<strong>length \u00d7 width<\/strong>\u00a0inputs are more useful than gallon-only rules.<\/p>\n<h3 id=\"hidden-maturity\">5) Tank maturity (biofilm time-on-task)<\/h3>\n<p>New tanks are less forgiving. Even after cycling, mature tanks often stabilize and handle small disturbances better. This is why it\u2019s smart to begin understocked and work upward only after you\u2019ve proven your nitrate trend and maintenance routine.<\/p>\n<h2 id=\"tool-picking\">Which calculator should you use? (AqAdvisor vs others)<\/h2>\n<p>Different calculators emphasize different risks. Here\u2019s how to pick and how to cross-check:<\/p>\n<ul>\n<li><strong>AqAdvisor<\/strong>: strong for beginner planning because it attempts bioload + filtration + water-change guidance and flags compatibility issues from a large species database. Great for \u201cis this obviously too much?\u201d checks.\u00a0<a href=\"https:\/\/aqadvisor.com\/articles\/AqAdvisorIntro.php\" rel=\"nofollow noopener\" target=\"_blank\">AqAdvisor tool overview<\/a><\/li>\n<li><strong>Rule-based pages<\/strong>\u00a0(inch-per-gallon, surface-area rules): good for understanding the concept of oxygen exchange and why tank shape matters, but not precise.\u00a0<a href=\"https:\/\/www.thesprucepets.com\/amount-of-fish-and-aquarium-size-1378335\" rel=\"nofollow noopener\" target=\"_blank\">The Spruce Pets stocking guidelines<\/a><\/li>\n<li><strong>Education-first guides<\/strong>: useful for building judgment (adult size, shoals, territory, activity).\u00a0<a href=\"https:\/\/injaf.org\/articles-guides\/general-guides\/understanding-fish-stocking-guides\/\" rel=\"nofollow noopener\" target=\"_blank\">INJAF guide<\/a><\/li>\n<\/ul>\n<h2 id=\"decision-tree\">A beginner decision tree (use this after any calculator result)<\/h2>\n<ol>\n<li><strong>If the tool warns \u201cminimum tank size not met\u201d<\/strong>\u00a0\u2192 choose different fish or a larger tank. Don\u2019t negotiate.<\/li>\n<li><strong>If water parameters don\u2019t overlap<\/strong>\u00a0\u2192 choose fish that share temp\/pH\/hardness, or accept you\u2019ll be constantly compromising.<\/li>\n<li><strong>If you\u2019re above ~85\u201390% stocked<\/strong>\u00a0\u2192 decide what you\u2019re willing to pay: more filtration, more plants, or more water changes. If the answer is \u201cnone,\u201d reduce fish.<\/li>\n<li><strong>If you\u2019re under ~70\u201380% stocked<\/strong>\u00a0\u2192 still stock slowly and verify nitrate trend; you can always add later.<\/li>\n<li><strong>If you\u2019re \u201coverstocked\u201d on paper but stable in reality<\/strong>\u00a0\u2192 your tank may be mature\/planted\/overfiltered, but keep a buffer for power outages, vacations, and growth spurts.<\/li>\n<\/ol>\n<h2 id=\"how-to-measure\">How to measure \u2018true gallons\u2019 and why it matters<\/h2>\n<p>Most beginners enter the label volume (e.g., \u201c20 gallons\u201d) but the real water volume is lower due to substrate and d\u00e9cor displacement. The safest approach is to treat your tank as ~10\u201315% smaller unless you\u2019ve measured it. Over time, this buffer also covers evaporation marks, filter maintenance delays, and the fact that fish grow.<\/p>\n<h2 id=\"nitrate-targets\">Picking a nitrate target that matches your maintenance<\/h2>\n<p>Aquarium Co-Op recommends using nitrate as a practical stocking gauge and keeping it under control with a water-change schedule you can actually maintain. If you pick a strict target, you\u2019ll need either lighter stocking, more plants, or more frequent changes.<\/p>\n<p><a href=\"https:\/\/www.aquariumcoop.com\/blogs\/aquarium\/how-many-fish\" rel=\"nofollow noopener\" target=\"_blank\">Aquarium Co-Op stocking guidance (nitrate method)<\/a><\/p>\n<h2 id=\"case-studies\">Mini Case Studies: Why calculators disagree (and how to decide)<\/h2>\n<p>It\u2019s normal to get different answers from different tools. That doesn\u2019t mean one tool is \u201clying\u201d\u2014it means the assumptions differ. Use the patterns below to interpret conflicts without overthinking.<\/p>\n<h3 id=\"case-active\">Case 1: Active fish in a tall tank (looks OK by gallons, fails by footprint)<\/h3>\n<p><strong>Scenario:<\/strong>\u00a0A 20-gallon \u201ctall\u201d tank with fast swimmers (danios). A gallons-only rule might say it\u2019s fine, but footprint-based logic flags limited horizontal swim room. The fix is usually a longer tank footprint, fewer active fish, or choosing calmer species.<\/p>\n<h3 id=\"case-biomass\">Case 2: Same inches, different body mass (danios vs goldfish)<\/h3>\n<p>Rules based on inches treat 10&#8243; of fish as 10&#8243; of fish. But as The Spruce Pets notes, full-bodied fish generate more waste than slender fish, so the same \u201cinch total\u201d can produce a very different load. Always stock by adult size and body shape rather than length alone.<\/p>\n<p><a href=\"https:\/\/www.thesprucepets.com\/amount-of-fish-and-aquarium-size-1378335\" rel=\"nofollow noopener\" target=\"_blank\">Surface-area and inch-rule limitations (The Spruce Pets)<\/a><\/p>\n<h3 id=\"case-plants\">Case 3: Planted tank vs bare tank (why AqAdvisor can look conservative)<\/h3>\n<p>Many hobbyists find calculators conservative for heavily planted tanks. Plants can reduce nitrate accumulation, but they don\u2019t remove the need for oxygen and they don\u2019t stop aggression. If you\u2019re planted and stable, you may safely run a little higher\u2014<em>but only after<\/em>\u00a0nitrate trend proves it.<\/p>\n<h2 id=\"filtering\">Filtration, flow, and \u2018turnover\u2019: what beginners should actually do<\/h2>\n<p>The Spruce Pets emphasizes filtration as a major factor in stocking and notes a common guideline of turning over the tank volume multiple times per hour. That said, flow rate alone isn\u2019t the whole story\u2014biological media and maintenance matter too. Treat turnover guidance as a starting point, then watch water clarity, ammonia\/nitrite (should be 0), and your nitrate trend.<\/p>\n<p><a href=\"https:\/\/www.thesprucepets.com\/amount-of-fish-and-aquarium-size-1378335\" rel=\"nofollow noopener\" target=\"_blank\">Filtration matters section (The Spruce Pets)<\/a><\/p>\n<h2 id=\"stocking-order\">Best order to stock a community tank (simple, low-risk)<\/h2>\n<ol>\n<li><strong>Week 0\u20132 after cycle:<\/strong>\u00a0add your hardiest, least aggressive group (often small schooling fish) in a modest number.<\/li>\n<li><strong>Wait 2\u20133 weeks:<\/strong>\u00a0test nitrate weekly; confirm fish are eating and behavior is normal.<\/li>\n<li><strong>Add bottom group:<\/strong>\u00a0once you\u2019re stable, add bottom fish (and feed sinking foods appropriately).<\/li>\n<li><strong>Add centerpiece last:<\/strong>\u00a0territorial\/fin-nippy fish (or anything that can dominate) should go in last, so they don\u2019t \u2018claim\u2019 the tank first.<\/li>\n<\/ol>\n<h2 id=\"vacation\">If you\u2019re going on vacation: stocking buffer matters<\/h2>\n<p>Stocking close to the limit reduces your safety margin for missed maintenance, power outages, or overfeeding by a fish-sitter. If you want a tank that survives real life, build a buffer: stock lighter than the calculator\u2019s max, keep filtration strong, and keep your plan simple enough that someone else can follow it.<\/p>\n<h2 id=\"checklist\">Printable checklist: Use a stocking calculator the safe way<\/h2>\n<ul>\n<li>\u25a1 Enter\u00a0<strong>length \u00d7 width \u00d7 height<\/strong>\u00a0(inches), not just gallons.<\/li>\n<li>\u25a1 Plan using\u00a0<strong>adult size<\/strong>\u00a0and minimum group sizes.<\/li>\n<li>\u25a1 Keep initial plan around\u00a0<strong>70\u201385%<\/strong>\u00a0if you\u2019re new.<\/li>\n<li>\u25a1 Stock in phases; never add everything at once.<\/li>\n<li>\u25a1 Watch\u00a0<strong>nitrate trend<\/strong>\u00a0and fish behavior; adjust before problems appear.<\/li>\n<li>\u25a1 Treat recommended water changes as the \u201ccost\u201d of your stocking plan.<\/li>\n<\/ul>\n<h2 id=\"faq\">FAQ<\/h2>\n<dl class=\"faq\">\n<dt>What stocking calculator should I use?<\/dt>\n<dd>Use at least one bioload-oriented tool (e.g., AqAdvisor) and sanity-check with a second perspective. Different tools make different assumptions; agreement between them is reassuring.<\/dd>\n<dt>Is \u2018100% stocked\u2019 safe?<\/dt>\n<dd>It can be, but it\u2019s often not beginner-safe. Aim lower unless you\u2019re experienced, heavily planted, over-filtered, and consistent with maintenance.<\/dd>\n<dt>Can I stock more if my tank is heavily planted?<\/dt>\n<dd>Plants can help with nitrate and stability, but they don\u2019t eliminate oxygen limits, aggression, or the need for biofiltration. Use nitrate trend + fish behavior as your judge.<\/dd>\n<dt>How fast should I add fish?<\/dt>\n<dd>Slowly\u2014after cycling, add a portion of your planned bioload, then wait a couple of weeks while testing nitrate and watching behavior before adding more.<\/dd>\n<dt>Why does my calculator say my tank is overstocked when it looks fine?<\/dt>\n<dd>Many tools are conservative and may not account for mature biofilm, heavy planting, or high maintenance. Still, treat it as a warning to verify with nitrate trend and oxygen\/behavior checks.<\/dd>\n<\/dl>","protected":false},"excerpt":{"rendered":"<p>Quick answer:\u00a0A stocking calculator is a planning tool, not a permission slip. Use it to catch obvious problems (tank too small, incompatible fish, not enough filtration), then confirm with\u00a0real-world signals\u00a0like nitrate trend and fish behavior. Stock slowly, aim conservative (often ~70\u201385% on calculators), and adjust based on your maintenance habits. What a stocking calculator actually&#8230;<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"default","_kad_post_title":"default","_kad_post_layout":"default","_kad_post_sidebar_id":"","_kad_post_content_style":"default","_kad_post_vertical_padding":"default","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-988","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/bfefishtank.com\/sv\/wp-json\/wp\/v2\/posts\/988","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/bfefishtank.com\/sv\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/bfefishtank.com\/sv\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/bfefishtank.com\/sv\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/bfefishtank.com\/sv\/wp-json\/wp\/v2\/comments?post=988"}],"version-history":[{"count":1,"href":"https:\/\/bfefishtank.com\/sv\/wp-json\/wp\/v2\/posts\/988\/revisions"}],"predecessor-version":[{"id":989,"href":"https:\/\/bfefishtank.com\/sv\/wp-json\/wp\/v2\/posts\/988\/revisions\/989"}],"wp:attachment":[{"href":"https:\/\/bfefishtank.com\/sv\/wp-json\/wp\/v2\/media?parent=988"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/bfefishtank.com\/sv\/wp-json\/wp\/v2\/categories?post=988"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/bfefishtank.com\/sv\/wp-json\/wp\/v2\/tags?post=988"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}